Претрага

Упит dcterms_subject_txt:Industrial and Manufacturing Engineering

2155 items

  • Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases

    Nikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić (2021)
    The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tetradentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible ...
    Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry,General Chemistry

  • Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases

    Nikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić (2021)
    The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tet radentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are ...
    Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry, General Chemistry

  • Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines

    Ugljesa Bugarić, Milos Tanasijević, Stevan Djenadić, Dragan Ignjatović, Ivan Janković (2022)
    This paper presents the model for the identification of reference points on the lifetime curve of engineering systems. This curve commonly represents the increase and decline of failure in relation to time. A direct correlation between failure rate and costs is assumed in this paper, therefore, statistical and empirical analysis of costs provided reference points. This approach is used for positioning stages of the engineering system’s lifetime with a minimal number of failures and costs, regardless of whether these ...
    Electrical and Electronic Engineering,Industrial and Manufacturing Engineering, Control and Optimization, Mechanical Engineering, Computer Science (miscellaneous), Control and Systems Engineering

  • Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry

    Steven Manders, Milorad Pantelić, Vladimir Milisavljević, Alberto Martinetti (2021)
    Self-engineering is a relatively new branch of knowledge that aims to understand how systems could “autonomously” re-configure or repair themselves without the intervention of the operators. A direct field of application is within the maintenance spectrum. Having systems or machines capable of self-detecting or even self-repairing could represent a game-changer, in capital asset fields such as the mining industry in particular. This paper aims to investigate the possible benefits and challenges of self-engineering / self-maintenance concerning mining machines, specifically bucket-wheel ...
    self-engineering, self-maintenance, maintenance operations, mining industry, bucket-wheel excavator, gearbox revitalization

  • Life Cycle Assessment of Individual Wood Biomass Heating Systems in Households

    Boban Pavlović, Dejan Ivezić, Marija Živković (2020)
    The use of solid fuels (wood biomass and coal) for heating of households continues to be common practice within European countries. Solid fuel combustion in households contributes more than 46% to total emissions of fine particulate matter. In this study, a life-cycle assessment (LCA) of firewood-based and pellet-based heating systems is performed. These two systems represent two different types of individual wood biomass heating systems. In the case of the firewood-based heating systems, it is analyzed a typical stove ...
    Grejanje, Analiza životnog ciklusa, Drvna biomasa, Individualni sistemi grejanja
    ... lifecycle of each HS (materials, manufacturing, transportation, use, and final disposal) [10]. Life cycle assessment (LCA) systematically analyzes pollution and resource connected to delivering a specific product or service. As such, the LCA identifies environmental hot spots and enables a comparison of different ...
    ... (wood) 80 17 2,383 The efficiency of HSs and LHV are assumed to remain unchanged for the entire life span of the systems [9]. To avoid unequal treatment of HSs, it is assumed the same transportation distances from the manufacturing location to the house, and the same type of lorry for the analyzed ...
    ... Systems in Households | Boban Pavlović, Dejan Ivezić, Marija Živković | 5th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2020, East Sarajevo, 2020 | 2020 | | http://dr.rgf.bg.ac.rs/s/repo/item/0005065 Дигитални репозиторијум Рударско-геолошког ...

  • A fuzzy-based decision support model for effectiveness evaluation - a case study of examination of bulldozers

    Miloš Tanasijević, Predrag Jovančić, Dejan Ivezić, Uglješa Bugarić, Radiša Đurić (2019)
    Effectiveness evaluation is one of the basic components of engineering asset management and maintenance engineering in general. Effectiveness is an overall concept representing a measurement of quality of service level for the analyzed engineering system. This concept contains a series of partial indicators relating to time in operation and time for maintenance activities, as well as functional properties of the system. This article describes the analysis and structuring of partial indicators, as well as the development of a model ...
    Efikasnost, Fazi zaključivanje, Prikupljanje podataka, Buldozer

  • Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy

    Milošević Maja, Zdravković Alena, Đordjević Biljana, Jelić Ivana (2021)
    ... the pots and their outer rims. Observed pores in sample 1 are of random orientation and size, indicating slower rotations of the potter’s wheel during the manufacturing process. Sample 2 has a specific fluid-structure that is consistent with the way it was fabricated. By the size and orientation ...
    ... terms of elemental composition observed by EDS, to the distribution and appearance of pores concerning the manufacturing process. Further investigations are necessity for an establishment of the standards that will guarantee and protect the originality together with the cultural heritage of the ...
    ... Miskolc, Hungary CULTURAL HERITAGE AND PROTECTION OF HAND-WHEELED POTTERY MANUFACTURE IN WESTERN SERBIA: CHARACTERISTICS OF ZLAKUSA POTTERY BASED ON SEM-EDS AND OPTICAL MICROSCOPY MILOŠEVIĆ, M.1, ZDRAVKOVIĆ, A.1, ĐORĐEVIĆ, B.2 & JELIĆ, I.3 1Faculty of Mining and Geology, University of Belgrade ...

  • Towards a Mining Equipment Ontology

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja (2012)
    ... in IT applications in mining engineering and other engineering disciplines whose importance is not always fully understood. Namely IT applications need proper and consistent use of terminology in order to build interoperable information systems. To that end engineering disciplines need terminological ...
    ... for mining engineering developed at the University of Belgrade Faculty of Mining and Geology, can be used for generating a mining equipment ontology. RudOnto is an integral part of a specialized mining engineering information system, which features functionalities for management and maintaining ...
    ... le in almost all mining engineering areas, including mining equipment management and maintenance. Basically, IT is introduced through computer-aided information systems, with the aim of securing reliable information for management and decision making in mining engineering systems [2]. Various IT ...

  • Refinement of waste phosphogypsum from Prahovo, Serbia: characterization and assessment of application in civil engineering

    Josip Išek, Lazar Kaluđerović, Nikola Vuković, Maja Milošević, Ivana Vukašinović, Zorica Tomić (2020)
    γ-spectrometry, brushite, chukhrovite, phosphogypsum, radionuclides, recrystallization
    ... according to the mineral origin, from 260 to 1860 Bq kg for apatite and from 460 to 640 Bq kg for phosphorite (Saueia, 1998). Through the manufacturing process, ~80% of ? 'Ra, 14% of ŠU and 30% of Th tend to be enriched in phosphogypsum, and the rest remains in phosphoric acid (Jung et al, 2017). This ...
    ... MPC(K) Q) where Cgax Crh and Ck are the measured concentrations and MPC (Ra), MPC(Th) and MPC(K) are the maximum permissible con- centrations of “Ra, Th and K, respectively. Equivalent values for building materials used for interior, exterior and civil engineering construction as a base for ...
    ... y-indices, with limiting values <1, the PG1 and PG2 samples should be rejected as materials for exterior and interior usage (Table 5) and may be used only in civil engin- eering construction as a base for roads, playgrounds and other civil engineering constructions. On the other hand, the PG1P sample ...

  • Assessment of environmental radioactivity and health hazard at Stara Planina region

    Slavko Dimovic, Boris Vakanjac, Ivana Jelic, Milena Rikalovic, Vesna Ristic-Vakanjac, Radoje Bankovic (2021)
    Циљ студије је био да се процени потенцијални ризик од зрачења у близини напуштених рудника уранијума, јаловишта или лежишта уранијума на Старој планини у Србији. За процену ризика одређено је неколико параметара: активност еквивалента радијума, Raeq, екстерни индекс опасности, Hex, брзина апсорбоване дозе гама зрачења, D, годишња ефективна доза на позадинској експозицији гама гама на отвореном, AEDoutdoor и ризик од рака током живота, ELCR. Добијени резултати су показали да сви узорци, осим једног, имају Raeq вредност и до два ...
    природна радиоактивност, животна средина, здравље, опасност, процена ризика

  • Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs

    John Nyame (2024)
    The importance of mitigating the effects of global climate change has necessitated an in-depth exploration of innovative strategies to reduce carbon dioxide (CO2) emissions. Among these strategies, Carbon Capture, Utilization, and Storage (CCUS) has emerged as a promising and transformative solution. This master thesis delves into the diverse realm of CCUS processes, aiming to unravel the positives challenges, and opportunities within this dynamic field. The analysis begins with a systematic examination of carbon capture technologies, encompassing post-combustion, pre-combustion, and oxy-fuel combustion ...
    Carbon Capture, Utilization and Storage
    ... large-scale utilization stem from their manufacturing routes, which are very expensive, and their long-term stability and reliability. Polymeric membranes that can be easily formulated in fiber modules have shown tremendous potential for large-scale industrial applications [44]. Inorganic membranes ...
    ... regional industries, leading infrastructure and logistics operators, global engineering firms, and academic institutions in a plan to decarbonize the UK's largest industrial region. This will be enabled by shared trans-regional pipelines for low-carbon hydrogen and captured carbon emissions, creating ...
    ... captured for enhanced oil recovery and carbon-based products manufacturing and finally carbon underground storage and transport based on the economic, environmental and policy factors. Figures 1.2 and 1.3 show a background of the carbon capture and storage process (CCS) and an example of a full-scale ...

  • Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit

    Sanja Bajić, Dragoljub Bajić, Branko Glušćević, Radmila Gaćina (2023)

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... duration. Life cycle is defined by several stages: Concept / project requirements; Project concept; Main project – designing; Manufacturing: Application / operation and Decommissioning. As shown in Figure 2, operation of the machine with the highest profit is just a short interval within the ...
    ... International Platinum Conference ‘Platinum in Transformation’, The Southern African Institute of Mining and Metallurgy, 2008, pp. 297-305. Life Cycle Asset Management, Life Cycle Engineering, Inc. Available online: www.LCE.com 6. Jankovic, I.; Djenadic, S.; Ignjatovic, D.; Jovancic, P.; Subaranovic ...
    ... selection, including savings and improvements, can be achieved by these activities: In-time replacement of auxiliary machines and vehicles; Usage of proven and quality machines with implemented unification as much as possible; Improvement of maintenance system; Implement modern and improved technologies ...

  • Mineralogical Discrimination between Authentic and Recent Imitations of Pottery Manufacture in Zlakusa, Serbia

    Maja Milošević, Mihovil Logar, Biljana Đorđević (2021)
    ... would indicate the manufacturing procedure. Sample -1- has slightly higher water absorption than the the rest of the samples. Differences in terms of manufacture processes and their characteristics are evident and should be emphasized for better understanding and awareness of the cultural ...
    ... electric drive) marked as -4- and by moulding (application of a mould) marked as -5-. Close examination of surface features and morphology was conducted to determine the characteristic attributes for a specific technique. Phase and mineral composition, texture, and structure of the samples ...
    ... it a unique phenomenon, in technological terms, is the fact that with the discovery of new techniques and production processes, the old ways, already adopted and mastered continued to live and actively coexist until today. This also brings a rise in imitations of pottery manufacture. ...

  • Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic

    Miljan Gomilanović, Miloš Tanasijević, Saša Stepanović (2022)
    This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...
    системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композиција

  • Upravljanje proizvodnjom nafte – novi alat na bazi fazi logike

    Мирослав Црногорац, Душан Даниловић, Лола Томић (2020)
    ... agriculture, industrial manufacturing, mining and untreated urban runoff and sewage cause most water quality issues. The development of industrial farming has resulted to increased applications of fertilizers. These and other pollutants from industrial water generate hazards to the environment and health ...
    ... of process planning. Applied Engineering Letters, 2 (4), p. 130-138. [3] Lukić, D., Milošević, M., Antić, A., Borojević, S., Ficko. M. (2017). Multi- criteria selection of manufacturing processes in the conceptual process planning. Advances in Production Engineering and Management , 12 (2), p. 151-162 ...
    ... Case study on topology optimized design for additive manufacturing, COTech, IOP Conference Series: Materials Science and Engineering, 2017. [4] Junk, S., Klerch, B., Nasdala, L., Hochberg, U.: Topology optimization for additive manufacturing using component of a humanoid robot, Procedia CIRP, ISSN ...

  • Mineralogical study of clays from Dobrodo, Serbia, for use in ceramics

    Maja Milošević, Predrag Dabić, Sabina Kovač, Lazar Kaluđerović, Mihovil Logar (2019)
    keramika, glina, Dobrodo, mineralogija, sirovina, Srbija

  • Structural characterization of traditional pottery produced from local clay, Rujište (Ražanj, Central Serbia), in an effort to preserve its geoheritage

    Maja Milošević, Biljana Đorđević, Alena Zdravković (2021)
    ... additional tempers added. Pottery manufacture with these specific raw materials and the final function of the product is closely connected, when material dictates technique. Production of pottery and the manufacturing process is yet to be closely investigated. References Djordjević, B. 2021 ...
    ... a mixture. As some of the slabs have rolled and rough edges they may be regarded as illite and/or halloysite. Morphology varies from short tubular, spheroidal and elongated tubules, which are the most common. EDS data confirmed hydroxides of illite and iron. Illite minerals deposited from formation ...
    ... Management and Events Ltd., Sofia Printing House: Bulged, Sofia 1505 Editors: Ruslan I. Kostov, Radostina Atanassova ISBN 978-954-92875-6-1 © Earth and Man National Museum, 2021 © Bulgarian Mineralogical Society, 2021 9th International Conference Mineralogy and Museums ...

  • Contribution to the geotechnical classification of municipal waste landfills in Serbia

    Dragoslav Rakić, Irena Basarić, Laslo Čaki, Slobodan Ćorić (2018)
    Management, Monitoring, Policy and Law,Nature and Landscape Conservation,Geochemistry and Petrology,Waste Management and Disposal,Geotechnical Engineering and Engineering Geology,Water Science and Technology,Environmental Chemistry,Environmental Engineering

  • Geoenvironmental Investigations at a Smelter Location in Bor (Serbia)

    Petar Papić, Zvonimir Milijić, Jana Stojković, Jovana Milosavljević, Maja Todorović, Marina Ćuk, Željko Kamberović (2014)